How do I make my own cornhole boards?

Making your own cornhole boards can be a fun and rewarding DIY project. Here are the steps to make cornhole boards:

Materials:

• Two sheets of 2' x 4' plywood

• 2 x 4 wood boards

• Wood screws

• Wood glue

• Circular saw or jigsaw

• Drill

• Hole saw drill bit

• Measuring tape

• Paint and brushes

Steps:

1. Cut the plywood into two pieces measuring 2' x 4' each. These will be the tops of your cornhole boards.

2. Cut the 2 x 4 wood boards into four pieces measuring 48 inches each. These will be the frame of the boards.

3. Using wood screws and wood glue, attach the 2 x 4 wood boards to the edges of the plywood sheets to create the frame of the boards.

4. Using a circular saw or jigsaw, cut a 6 inch diameter hole in the center of each board, centered 9 inches from the top of the board and 12 inches from each side.

5. Sand the edges of the hole and the boards to smooth out any rough edges or splinters.

6. Paint the boards with your desired design and colors, allowing ample time for the paint to dry before use.

7. Optional: add legs to the boards using 2 x 4 wood boards, attaching them to the back of the boards with wood screws and hinges.

Tips:

• Measure carefully to ensure that the holes are centered and the boards are the correct size.

• Use wood glue in addition to wood screws for added stability.

• Sand the boards thoroughly to prevent any rough edges or splinters that could cause injury.

• Choose a durable paint that will hold up to outdoor use and the wear and tear of the game.

By following these steps, you can make your own cornhole boards and enjoy playing this fun game with family and friends. And once you’ve built your dream boards, check out our selection of professional, high-quality cornhole bags to take your game to the next level!